PDA

View Full Version : GSXR 1216 BREAKING FOR PARTS



alfiestorm
14-01-2008, 08:30 AM
The project bike is now going to be sold off in bits

<s>The engine is a diamond it has gas flowed head,hot cams on slotted sprockets and kibblewhite valves,1216cc,new camchain and APE manual tensioner. APE studs and nuts,new genuine suzuki clutch plates,bandit 1200 gearbox and sump new main bearing shells while it was apart. The original tuning work was carried out by balls racing.$2200 ono offers
Includes starter motor and alternator but not the dyna ignition
I Rebuilt the Engine and it will require running in, buyer will have to organise pick up but I will help as much as possible as far as 200k's from 5126.on</s>sold to a very nice man in Darwin

<s>Wheels with good tyres including spindles and spacers,speedo drive and rear sprocket carrier the rear is a 5.5 $500 ono (not including discs)</s> sold

<s>Petrol tank no dents or filler $150 </s>on fleabay sold

USD forks including triples and fat bar risers and now includes a set of renthal fat bars $400

<s>Ohlins shock offers invited </s>sold

<s>CV carbies (set up to run with the pods and a straight thru pipe) with red foam pod filters $200</s>sold

Z650 duc tail fibre glass offers invited

<s>Stainless bandit 12 headers $200</s>sold


Lock set inludes ignition switch, petrol cap lock not the cap, seat release and of course a key $70

gsxr750 1989-90 frame and swingarm minus subframe has victorian single seat compliance plate offers invited

<s>Front brake master cylinder round with lever $60 </s>sold

rear brake master cylinder with braided line $45

<s>Left side switch gear $30</s>sold

Right side switch gear including throttle tube $35

Starter relay $20

<s>Fuse box $20</s>sold

<s>Dyna coils 2.2 ohms grey with leads $130 </s>sold

rear set left $40

rear set right $40

<s>Side stand including switch $30</s> sold

<s>clutch master cylinder (rectangle) with lever $60</s>sold to the nice man in Darwin

<s>standard clutch hose lobbed in with the master cylinder</s>Gone to the nice man in Darwin

<s>Engine mounts $100 </s>sold

<s>Chain and sprockets $50</s>withdrawn from sale as I have noticed the front sprocket is fucked


All the above is post extra and at cost no mark up on postage.

Stu

03gixxerpilot
14-01-2008, 09:39 AM
Stu dibs on the sidstand, pm me your bank details an i will deposit the money and send you my details.

Cheers Clive

jakam04
14-01-2008, 10:41 AM
Stu,

Could I have that front master cylinder and also the coils if they will work fine on my GSXR.

J

britfighter
14-01-2008, 01:02 PM
hey jarrod need to talk to you bell me mate asap

Jazdiver
14-01-2008, 05:54 PM
Howdy, could you tell what colour the wheels are please, are they the 3 spoke L or M model style? Condition of chain and sprockets and teeth sizes - thankyou.

Blackkat
14-01-2008, 06:36 PM
I'll have the l/h switch please.

gibbo
15-01-2008, 12:10 PM
Hey Stu, I'll take those headers off your hands mate, pm your details and I will put the money in, plus postage of course.
What are you doing with the can mate?

alfiestorm
15-01-2008, 01:51 PM
Chaps I am packing stuff this thursday eve and posting Friday for those that have bought stuff

alfiestorm
16-01-2008, 08:20 AM
The engine is now on fleabay

Docktor
16-01-2008, 10:03 PM
Hands up on the cv carbs with the pods please Stu.
Will slap a dd thru when ya sort postage bloke.

alfiestorm
18-01-2008, 09:41 AM
Any one else for anything before the rest of it gets put on fleabay?

Gix11
18-01-2008, 01:12 PM
I can't believe those forks and triples haven't gone to a Bandit owner or similar! That's cheap as. Hang on, I might know someone....

Gix11
18-01-2008, 01:48 PM
Email sent Stu.

alfiestorm
21-01-2008, 08:23 AM
<s>No one wanted the engine on fleabay <s>so it looks like I will be </s><s>building me a super hot 7/12:D</s> when I get back to England in a few months time</s>.

Sold to the very nice man in Darwin

DCRacing
21-01-2008, 11:04 AM
hey, i have been getting a bit of stuff of you on fleabay, but how much for your frame and swingarm? does it have the cast axle mount's?

alfiestorm
21-01-2008, 11:47 AM
quote:Originally posted by DCridedays

does it have the cast axle mount's?


I take it you mean the ends of the swingarm then yes they are cast and have been smoothed over for polishing.

Dont know on the price for the frame and arm $150? plus post how's that sound

DCRacing
21-01-2008, 08:10 PM
Are the forks out of a 750 or a 1100? i might as well be in for a lot as in for a little

03gixxerpilot
22-01-2008, 05:03 PM
hey stu would you have the plastic under tray for the rear of the bike the one behind the battery? If so how much for it including postage toTownsville

Cheers Clive

alfiestorm
22-01-2008, 05:48 PM
quote:Originally posted by 03gixxerpilot

hey stu would you have the plastic under tray for the rear of the bike the one behind the battery? If so how much for it including postage toTownsville

Cheers Clive


Nah mate that piece is non existant

Gix11
22-01-2008, 08:02 PM
Stu, can you email me your phone number please mate.

alfiestorm
22-01-2008, 08:17 PM
quote:Originally posted by Gix11

Stu, can you email me your phone number please mate.


Done oh yeah and no passing them on to gay love chat forum's[xx(]

Gix11
22-01-2008, 08:55 PM
Ahhh. Well in that case I don't want it then.

scotty mac
25-01-2008, 01:04 PM
hey stu, did ya want to sell the rear spocket n chain still? i've got a good front sprocket but me chain n rear is stuffed.

alfiestorm
25-01-2008, 01:12 PM
Nah mate the rear sprocket had a little life left in it and that is going with the wheels the chain and front sprocket are fucked.

Anyway mate you should be replacing as a set or it will only cost you loads with bits wearing out mucho quicker and chains snapping that hurts.

Sorry I cant help mate

Rocket
25-01-2008, 01:13 PM
Got the shocker thanks Alfie. Cheers

scotty mac
25-01-2008, 01:14 PM
no dramas mate. jus trying to take shortcuts:D
quote:Originally posted by alfiestorm

Nah mate the rear sprocket had a little life left in it and that is going with the wheels the chain and front sprocket are fucked.

Anyway mate you should be replacing as a set or it will only cost you loads with bits wearing out mucho quicker and chains snapping that hurts.

Sorry I cant help mate

Watto
25-01-2008, 04:18 PM
Hey Stu

parts rocked up today - many thanks mate - at least you get to spend 1 aussie day over here so whoop it up!!!!

Watto

jakam04
25-01-2008, 07:29 PM
Parts arrived here as well.... Your a legend mate.

Thanks Heaps.

Jarrod

03gixxerpilot
25-01-2008, 07:44 PM
stu what are the forks out of mate,
Cheers Clive.

alfiestorm
25-01-2008, 08:02 PM
finding out now as there has been some confusion as to what they came out of but I am betting on 750 as the frame and swingarm are 750.
Let ya know in a bit beer

alfiestorm
25-01-2008, 08:08 PM
Measured them against my 1100 slingshot and the forks I have for sale are off of a 750 slingshot.

Hope that helps ya mate

alfiestorm
25-01-2008, 08:12 PM
Thanks guys for letting me know your parts have turned up ok

Rocket shine up that shock and wack it on you'll love it, plus you can raise the back end right up there if you want to

Rocket
26-01-2008, 10:22 AM
quote:Originally posted by alfiestorm

you can raise the back end right up there if you want to


Yes, yes I do.
I'm also trying to get bolt in swinger extensions so it'll be good to have ride height adjustability.

03gixxerpilot
26-01-2008, 11:43 AM
stu how much would postage be to Townsville i have a friend who might be intrested in them

Cheers Clive

alfiestorm
26-01-2008, 03:08 PM
quote:Originally posted by 03gixxerpilot

stu how much would postage be to Townsville i have a friend who might be intrested in them

Cheers Clive


based on your post code clive delivery by auss post is $43

03gixxerpilot
26-01-2008, 04:09 PM
thanks mate i'll let him know

Cheers Clive