GSXR Clearout

[ozkat]

1. GSXR1100 K 1340cc engine
Was originally 1127cc
Has Wiesco 1340 bigblock
Cosworth forged pistons
Cosworth rings
Yoshi cams
Ported and flowed head
Unshrouded valves & 3 angle cut
Heavy duty clutch with Kevlar plates
Undercut gearbox
New cam chain tensioner
Cometic stainless head gasket
It would cost in excess of $8000 to build this motor.
Has been dynoed at 165.6 hp with standard 40mm carbs and airbox.
Can provide dyno sheet
No carbs, but has oilcooler
Comes with standard clutch cover not the windowed one
SOLD

2. GSXR750 WR? Usd front end
Full white power internals
Blue anodized outer fork tubes
Inc clipons, both triple clamps
750 k front wheel
Very good discs
Calipers
Braided brake lines
Brake master cylinder
Front guard
Speedo drive
All in good condition
SOLD

3. GSXR 750 k frame
Standard frame
No swingarm
$450.00 ono

4. New TO4B turbocharger
.60 comp cover
57mil comp wheel
Turbine housing is 100 A/R v band outlet
This is a genuine Garrett turbo, brand new never used.
SOLD

5. 2x Yamaha R1 rear wheels
17 x 6in
Good condition
No sprocket carriers or discs
SOLD

6. 1x K4 GSXR rear wheel
New white powder coat
Inc disc
No sprocket carrier
As new
SOLD


7. Bandit 1200 stainless headers
Good cond
SOLD

Heaps of other oilcooled GSXR stuff as well.
All prices are + postage
Ill post pictures asap
Reason for selling? Ive just ordered a new 07 Busa
Shayne

[RUSS M8]

Hi Ozkat,
What are the Bandit headers, OEM or aftermarket/high performace?
Cheers,
Russ.

[ozkat]

quote:Originally posted by RUSS M8

Hi Ozkat,
What are the Bandit headers, OEM or aftermarket/high performace?
Cheers,
Russ.
im pretty sure they are OEM headers mate, ill get a pic up when my Mrs gets back from the shops with new batterys for my camera. You may be able to tell if they are OEM.

[ozkat]

http://www.streetfighters.com.au/forum/upload/13410316871830.jpg

http://www.streetfighters.com.au/forum/upload/13410316869590.jpg

bigblock 1340

http://www.streetfighters.com.au/forum/upload/13410316867870.jpg

http://www.streetfighters.com.au/forum/upload/13410316875966.jpg

front end

http://www.streetfighters.com.au/forum/upload/13410316879854.jpg

frame

http://www.streetfighters.com.au/forum/upload/13410316854926.jpg

one of the 17x6in R1 wheels the other is silver

http://www.streetfighters.com.au/forum/upload/13410316866334.jpg

K4 GSXR 1000 17x6in wheel

http://www.streetfighters.com.au/forum/upload/13410316878838.jpg

http://www.streetfighters.com.au/forum/upload/13410316876990.jpg

http://www.streetfighters.com.au/forum/upload/13410316879102.jpg

turbo

http://www.streetfighters.com.au/forum/upload/13410316868166.jpg

bandit 12 headers, inc the pipe from headers to muffler

[gunnie]

Ozkat, do you know if your front end would fit the earlier 86 GSXR1100 frame without too much trouble? If so, send me your bank details.

[sharky]

Pretty keen on the black R1 wheel mate. Won't have the spare for about 3 weeks though....got 2 big jobs on that I won't get paid for 'til then. I'd pick it up from ya once I get to the sunny land (mid oct). Is this poss ????

[ozzy1100]

oz kat im keen on the front end and K4 GSXR 1000 17x6in wheel
but could you please tell me the lenght of forks from centre of hub 2 top of shock
its for a rebuild on a 1100 zephyr
is pick up ok
thanks
mob 0416 220118

[ozkat]

gunnie, sharky and ozzy you all have mail.

[gunnie]

nothing has come through yet mate. sorry I just noticed my email was incorrect - have fixed it now, home number is 07 47288014

[Jockney Rebel]

ere oz you aint got a bandit top yolk in amongst all that lot have you?

[ozkat]

Yeah Jim i have, top and bottom from memory. $35.00 for both inc postage ok? PM me if your interested. Ill buy a carton for the bike week bbq for the boys.

[Deano]

do you have a pair of alloy front engine mount plates to suit 91 mod mate.

they seem to be different from J to M models.

its the triangle one at the front that bolts to the frame and the rubber bush thing on the motor behind the oil cooler

cheers

and welcome back

[devo]

So whats the story Mate ?????????????[:0]

[ozkat]

quote:Originally posted by devo

So whats the story Mate ?????????????[:0]
Bought a new Busa mate :D

[ozkat]

no sorry Deano i dont, but i really cant see why there would be a difference

[gunnie]

Oz, could you resend email to me please as I had my email stuffed up in my profile, thanks

[Deano]

quote:Originally posted by ozkat

no sorry Deano i dont, but i really cant see why there would be a difference


the 2 m8 holes are at different spacings. about 5mm difference

thanks

i will keep hunting

[Watto]

hey oz

off hand will the 6 inch k4 rim fit in a standard slingy swinger without any dramas?

[BANDITROD]

that turbo be any good for my bike(b12) cheers Rod

[BANDITROD]

if so ill take it and let me know how much inc post to 3414 vic mate

[Hagarr]

Interested in the motor what about including the Clutch Window cover?

[Deano]

quote:Originally posted by BANDITROD

if so ill take it and let me know how much inc post to 3414 vic mate



bit big i think.

or are you planning to make 500hp?

[Jockney Rebel]

shayne u got mail ...

[iopnr]

ozkat u got a set of 750 4-1's laying around at all chasing a set for an m model

[BANDITROD]

quote:Originally posted by Deano


quote:Originally posted by BANDITROD

if so ill take it and let me know how much inc post to 3414 vic mate



bit big i think.

or are you planning to make 500hp?
no it will prob go on a mates buggy got a busa engine going in it

[EXBEN]

Im interested in the turbo also if Rod don't want it.

[Booster]

I may have convinced Oz to use it himself ...

[God]

Hey Oz,

I was only wonderin the other day what became of the slabby you got from me.

Cheers

God

[Gix11]

He sold that Tim. This is a different motor again.

[BANDITROD]

quote:Originally posted by EXBEN

Im interested in the turbo also if Rod don't want it.
it all yours mate if you want it

[EXBEN]

quote:Booster Posted - 23 Jul 2007 : 11:55:47
--------------------------------------------------------------------------------
I may have convinced Oz to use it himself ...
So now I just need to unconvince him.............
How about it OZ is it still for sale or what???

[BANDITROD]

quote:Originally posted by EXBEN


quote:Booster Posted - 23 Jul 2007 : 11:55:47
--------------------------------------------------------------------------------
I may have convinced Oz to use it himself ...
So now I just need to unconvince him.............
How about it OZ is it still for sale or what???
just out of curiosty what are you gunna do with it ben

[EXBEN]

ummm.............................................. Turbocharge something [:o)]

[qickdraw]

Fuck, I wanted that but I only just saw the bloody thread!
:(

[BANDITROD]

quote:Originally posted by EXBEN

ummm.............................................. Turbocharge something [:o)]
next project ben. do you sleep or what

[ozkat]

Ive emailed all the 1st people who said they were interested in stuff. Also Ben you have mail.
Shayne

[EXBEN]

So do you

[sharky]

Shayne, You got male :(:(

[Gix11]

quote:Originally posted by sharky

Shayne, You got male :(:(


Male hey? I knew it.

[ozkat]

I think he ment mail, you ment mail didnt you Russ? Please tell me you ment Mail.

[sharky]

You can take it whichever way you want it mate [:X] :D

[ozkat]

Jeez you smooth Russ, you have mail.....not male ;)

[Jockney Rebel]

Shayne chuck us yer bank details and ill get yer the dosh for those yolks ill e -mail u my addy too