PDA

View Full Version : Busa Bits



Booster
25-06-2007, 11:51 PM
GSXR 600 swingarm and pivot, underbraced extended to busa 4-8 "over with alloy chainguard $450
std busa swingarm $150
busa shocks some good $50 some rebuildable $20
2 good front discs $250
2 discs need attention $100
2 front guards both with some scratches one missing part of a rear mouting tab $120 and $75
Clutch cover modified to fit over a lockup clutch $100
clutch hub with welded centre $80
Footpeg brackets front or rear $10 ea several sets
Front calipers $120
rear caliper $50
Sprocket cover and cyl $50
Tail fairing light scratches $120
Steel subframe $175
Alloy subframe (no cracks) $120
Hump $100
Launch/shift light $100

Deano
26-06-2007, 07:11 AM
they 6 pot calipers mate?

if so first dibs on front and rear

Booster
26-06-2007, 06:02 PM
Couple of sets here Deano ,i'll put one set aside with your name on it .

Dick
26-06-2007, 06:23 PM
I remember reading that a Busa shock will slide straight into a Bandit?? If this is true (anyone??) I'm dead keen to relieve you of one

Deano
26-06-2007, 06:46 PM
quote:Originally posted by Booster

Couple of sets here Deano ,i'll put one set aside with your name on it .


cheers mate thanks

Booster
26-06-2007, 06:46 PM
Dick
330mm centres,13kg/mm spring,
can take pics if needed .

Dick
26-06-2007, 07:28 PM
After a quick bit of research, it looks like the Busa shock slots into 01+ Bandits easily. Since mine is a 98 Bandit, i'll need a GSXR750 shock. Thanks anyway mate. I was excited for a bit there!!

Booster
26-06-2007, 07:44 PM
~30mm longer
no worries.
the gsxr 600 shock has a slightly higher spring rate than the 750, you may find it suits better.

Dick
26-06-2007, 10:36 PM
Awesome. Thanks for the heads up.

Zed14
28-06-2007, 12:18 AM
where are you?

Zed14
28-06-2007, 09:08 AM
any swingarm bolt or axle with the standard busa arm. and does the rear caliper have the mount?

Anakist
28-06-2007, 03:08 PM
How much for a good shock shipped to 4700? Also, does the Busa have the three bolt exhaust attachment? If it does, do you have one and how much?

Thanks.

James

Deano
28-06-2007, 08:16 PM
boosters unable it get on line at the mo and wants his ph number on here. it is 0428655445

Booster
01-07-2007, 09:20 PM
WOO HOO i'm back !!!
Bloody viruses ,worms,trojans whatever it was .
Rexie recieved your sms, let you know tomorrow.
Anakist i have scratched exhausts but no good ones, its 3 bolt but not sure if all Suzuki 3 bolt exhausts are the same, i'll get a price post too

Anakist
02-07-2007, 07:05 PM
I am looking for a section of the exhaust pipe that connects to the muffler. If you have one, let me know price for that and the shock shipped please.

James

Booster
02-07-2007, 11:49 PM
James how does $70 shipped with the exhaust section sound , do you want the complete link pipe or just a piece with the flange on it ?

Anakist
03-07-2007, 08:31 PM
Whatever is easiest for you. I will have to cut and shut it to fit so longer is better, but in the grand scheme of things it doesn't really matter.

Sounds good. OM me your details and I will send you money.

James

luke4130
04-07-2007, 06:07 AM
Booster, do you have a front lever/master cylinder to suit the six pots available?

Luke

Booster
04-07-2007, 10:14 AM
Damaged ones only Luke, , broken lever and missing top cover,

Zed14
11-07-2007, 09:53 PM
got the stuff today booster. thank you.

Blackkat
12-07-2007, 09:38 AM
Booster, got any 6 pots left?

alfiestorm
12-07-2007, 09:59 AM
is the only damage to the front brake master cylinder (s) to the lever is the actual body of the cylinder ok if so I'll take one if the price is right

Booster
12-07-2007, 01:56 PM
quote:Originally posted by aussiecat

Booster, got any 6 pots left?

Yep 1 more set.

Rexie, , more use on your bike than sitting in my shed.

Alfie, threads broken off in the bar clamp and a broken thread in the top cover too, cover missing,other half of bar clamp missing,
mark on front of cyl.
You pay postage and you can have it ;)

Booster
12-07-2007, 01:59 PM
http://www.streetfighters.com.au/forum/upload/582681960497550.jpg


quote:Originally posted by Booster

GSXR 600 swingarm and pivot, underbraced extended to busa 4-8 "over with alloy chainguard $450
std busa swingarm $150 SOLD
busa shocks some good $50 some rebuildable $20
2 good front discs $250
2 discs need attention $100
2 front guards both with some scratches one missing part of a rear mouting tab $120 and $75
Clutch cover modified to fit over a lockup clutch $100
clutch hub with welded centre $80
Footpeg brackets front or rear $10 ea several sets
Front calipers $120
rear caliper $50
Sprocket cover and cyl $50
Tail fairing light scratches $120
Steel subframe $175
Alloy subframe (no cracks) $120 SOLD
Hump $100
Launch/shift light $100 SOLD

bensrg500
12-07-2007, 07:47 PM
hey gday booster any idea if those there them discs will fit my 96 gsxr750, if so ill go dibs on the good ones!!!cheers ben!

Booster
13-07-2007, 09:06 AM
Yep ,lots of suzuki front discs from then to now are the same,

Cruisecontrol
20-07-2007, 12:52 PM
have you still got GSXR compatible discs? If so what condition are they in?
Cheers

ozkat
20-07-2007, 01:20 PM
Booter im interested in the arm if you still have it. ;)

Booster
20-07-2007, 01:59 PM
Cruise there still here, can't feel any ledge from the used to unused are,no hot spots or pulsing lever, one is oem black centre and the other was gold that someone painted black (the mates to these are the 2 that are bent but would recondition fine)

Shayne Yep still here too. I'll give you a call again later .

Cruisecontrol
20-07-2007, 03:31 PM
Sounds good, mate.

I will email you shortly.

Blackkat
20-07-2007, 08:03 PM
Booster you get my email

Booster
21-07-2007, 09:39 AM
Yes sorry i started getting measurements and thought i should be talking to you as i did it, took some pics i'll send thru now.