WTB: K2 gsx-r front brake calipers

[Cruisecontrol]

As per the title.

I have a set of K2 forks that I am using and need a set of calipers to help me stop.

They don't necessarily need to be gsx-r as long as the bolt holes are 70mm apart it is all good.

If someone has a set they are willing to part with or can point me in the right direction it would be greatly appreciated.

Cheers.

[ozzy1100]

cruise the only other 6 spots for the k1 k2 gsxr that will fit are the ones of the gsx 1400 ... the hole centres are 63 mm
and all the other 6s are 90mm even if they from kwakas or suzzy .. i used the same set on my early 90s kwaka replaceing the
4 spots and those brakes ar the only ones with 63 mm ( i had 2 drill and tap from 8mm to 10mm fine )
hope this helps i got a pair fromsydney for $260 on my door with pads (ebc sintered 1/2 used) lines and bolts

[sharky]

Wifes got a pair of 4 pots from here zzr (we swapped 'em for the gixer 6 pots). She'd prob'ly let you have them cheap ?

[Cruisecontrol]

If they will fit Sharky I will take them in a heartbeat.:D:D:D

[sharky]

I'll double check the hole spacing in the mornin and see what she wants for 'em.

[Cruisecontrol]

http://www.streetfighters.com.au/forum/upload/34343240720031.jpg

[sharky]

http://www.streetfighters.com.au/forum/upload/55237022942189.jpg

[ozzy1100]

thats the ones sharky the only prob he might have is the 6s of the gix have 2 be spacered out 1.5 mm from mem
so the 4s might be out that much 2 the disk but the pads prob take that much up after bleading but that was on my
bike the zzrs might have diff spaceing

[Cruisecontrol]

Fit they will. :D

How much does the minister for finance want for them?

[sharky]

she's just gone off for an arvo 'snooze' so I'll let ya know later...

[sharky]

Hows about $100 inc postage ?

[Cruisecontrol]

Sounds good to me.

Thanks heaps Sharky. Email me your bank details and I shall deposit the dosh.

[sharky]

Pm me your address mate and I'll email ya back.