PDA

View Full Version : For the gix boys...



Docktor
27-05-2007, 10:51 PM
Bought a set of 6 spot nissin callipers off ebay,He lives like 10 minutes from my place. They are really off krackafatties but they fit old school gixxas too. He has 2 sets of em left(he used to work for keith the thief).And will sell em for 115 bucks a set.Pads are pretty trashed in em but I figure thats pretty cheap for em,soooo if ya want a set let me know and I will hook it up.

Deano
27-05-2007, 11:35 PM
i am keen mate. hook a nigga up

Docktor
28-05-2007, 04:23 AM
Sweet as,I will do the same for a white fella too. 1 down and 1 to go. This is fucked, no one starts work at 5 am :(.

Cruisecontrol
28-05-2007, 05:58 AM
If they fit a K2 front end I will take the other set.

Cheers.:D

Docktor
28-05-2007, 03:58 PM
Ummmm ,not sure. Deano might know, If they fit they are yours mate. Hey Deano, happy to swap for any gix gear you got laying round too ?. Need braided lines for my halfafighter if you got any.

Rocket
28-05-2007, 04:58 PM
Dibs !!!
If CC falls through, I'll grab the second set for sure.

Cruisecontrol
28-05-2007, 05:40 PM
If the mounting bolts are 60mm apart at their centres then I will definitely take them.

If not, bummer...

Deano
28-05-2007, 05:49 PM
they are virtually the same as gix thou six pot just a different color i think. therefore should fit.

what length braided lines you need mate?

for clipons or proper bars? will have to look in the butchers boxes but not sure bout that one.

chopiesel
28-05-2007, 06:13 PM
when i saw the title i was expecting to see a pic of a jerry can and some matches in this thread!

Docktor
28-05-2007, 06:21 PM
The mounts are 90 mm apart Dan, I will wait to hear from ya before I pass em over to rocket tho. And for riser mate, I have finally strated work on the gix, Slapped the thou rear end in on the weekend, cut that crap tail job off and a few bits n peices more. I still need headers for a 11 tho :(.

Cruisecontrol
28-05-2007, 09:02 PM
Thanks anyway Doc, but they aint gonna fit. Bummer it is...

Rocket
29-05-2007, 10:24 AM
Sorry Cruise.

I roughly measured mine Dok and they are 90ish mm, so just let me know how you want to organise it.
Direct transfer is easy enough.

Questions, does the $115 per set mean each or per pair ?

Does the dude know what model they're off so i can get seals, o-rings and pads?
Probably not a big deal if he doesn't.

Docktor
29-05-2007, 02:51 PM
Gunna need address off ya, Umm $115 means each.......NOT.. its for a pair mate. Prolly about 15 bucks post I reckon to Perf. One of them has "00" ZX9. so I guess if ya ask for stuff to suit that ya wont go wrong.Sooo, 4130 into my swiss bank account will see ya clear I think.If not it will be out by a jug of beer at next AFR.

How u wanna hook yours up Deano ?

Rocket
29-05-2007, 03:05 PM
Just need your bank details and I will do it right away.
PM sent with address.

ummm... I assume 4130 means $130 ?

Docktor
29-05-2007, 03:40 PM
No way. I mean 4130 million dollars or you will never see your pet wombat again !!!. Oh ok, $130 will do it. Check ya mail, I sended some details mate.

Rocket
29-05-2007, 03:51 PM
Payment made.
Cheers Dok, this is the shit that I love about this place.

Deano
29-05-2007, 06:14 PM
thanks mate.

what is easy for you i am happy to lob some beer tokens into you account and wack em in the post mate.

unless you are kicking around this side of town at all?

Docktor
29-05-2007, 10:20 PM
I may be able to get over there in the next week.Chuck me a addy and I will see wot i can do.

Rocket
31-05-2007, 12:42 PM
Doktor, got my calipers this morning mate.

Thanks a lot for sending them so quick, I'm a happy camper.

Will do a trial fit tonight and order seals and pads tomorrow.
Then I just gotta decide the best way to spruce them up so they look purdy.

Docktor
01-06-2007, 04:42 PM
Sweet bloke, They are pretty good nic, Have a play and see what ya come up with All good Rocket .