blower for sale .. not any more !!

[latheboy]

http://www.streetfighters.com.au/forum/upload/94075920499682.jpgIts a roots type supercharger off a toyota 4AGZE .. ive had it for a few years and never used it .. nothing wrong with it its just a bit dirty .. the front pulley is missing cause it was fucked when i got it .. its not hard to make a pulley or even buy one the Ø you need .. i do have some multi V pulley's hanging around if you want .. as is $200 ... Ivan

[latheboy]

http://www.streetfighters.com.au/forum/upload/940759204105186.jpg

[Benz]

Er Ivan , is it an SC12, or an SC14. The SC14 I have on the VL is getting a bit noisy. Not too bad after 6 years of thrashing, it makes a big difference to low down torque, mainly, and helps the topend a bit.
The sc12 is just a bit smaller,produces 1200cc per turn, instead of 1400. I would use my existing magnetic pulley on it anyway.
I am interested,and the price is good:)

[latheboy]

To be honest Benz i have no idear ... i was told the blowers that come off the 2L are the most common but thats not much help either ... if you measure the lenght of the main body .. ( with out pulley ) i can measure mine and see if they are the same .. hope that will help ..

[Benz]

Measured my s/c as best I can in the very tight confines it lives in, and it's about 220-230mm long [at the bearing plate, measured from the alloy,not the cap]and about 180mm across the body, can't measure the depth, too hard to get a true measurement.

[latheboy]

ill get on it tonight and get back to you ... cool

[latheboy]

PM sent ...