Shed Cleanout

[ozkat]

I have to get rid of alot of stuff i have in my shed, ill never use it but someone here might be chasing some of this stuff.
Heavy duty oil cooler NEW never used $250
GSXR slingshot clocks speedo has broken needle SOLD
RGV USD forks Perfect cond SOLD
Set of Sportmax race replica tyres ex supersport tyres 80% rubber left not blue 120/70/17 and 180/55/17 super sticky SOLD
Migmate Mig 150 amp welder used once as new inc remainder of warranty Gas/Gasless inc all acc and 4 wire spools and small gas bottle $500
GSXR 90 model rear caliper and 2 4piston from calipers good cond SOLD
GSXR 1100 complete hydraulic clutch setup. everything inc $150
pics of above items to follow.

[ozkat]

http://www.streetfighters.com.au/forum/upload/58991342649102.jpg $250

[ozkat]

http://www.streetfighters.com.au/forum/upload/58991342666310.jpg SOLD

[ozkat]

http://www.streetfighters.com.au/forum/upload/58991342652966.jpg SOLD

[ozkat]

http://www.streetfighters.com.au/forum/upload/58991342661398.jpg SOLD

[ozkat]

http://www.streetfighters.com.au/forum/upload/58991342660542.jpg $500

[ozkat]

http://www.streetfighters.com.au/forum/upload/58991342658278.jpg SOLD

[ozkat]

http://www.streetfighters.com.au/forum/upload/58991342657846.jpg $150

[Benz]

Ozkat,
I'll take the tyres, if you're willing to send them up to me.
That Mig looks interesting too, but freight weight is a consideration..... maybe.
I have a set of '90 clocks here, and the needle on the speedo is broken in exactly the same place:(

[fimpBIKES]

little mig like that would weight too much


dont tell me your buying a house too mate?

[gibbo]

I'm after the little winder off the side to reset the trip meter, so if you've got one of those lying around I'll take it.

[ozkat]

mig weighs 25kg so shouldnt cost more than $50 australia wide.

[ozkat]

i can send the tyres COD if you like benz or pay for tyres and just pay postage at your end would be cheaper for you.

[BOHEMION]

quote:Originally posted by Benz

Ozkat,
I'll take the tyres, if you're willing to send them up to me.
That Mig looks interesting too, but freight weight is a consideration..... maybe.
I have a set of '90 clocks here, and the needle on the speedo is broken in exactly the same place:(


Couriers World Wide Express mate (formally TT international) Fuking cheap as all over Aus for there road service

[ozkat]

thanks boh, got a ph number?

[Benz]

Oz,
I'll definately take the rubber mate.Send them up COD if you like, I'll PM ya the details.

[BOHEMION]

ive got the number at work mate will post it up tomoz

[moog]

is the welder still for sale, i know someone in Perth who may be interested

[BOHEMION]

Shaneo the cumber for Couriers World Wide Express is 1300 363 525

[ozkat]

moog, yes the welder is still for sale.

[moog]

i asked him but he wants a TIG welder.. Sorry

[Benz]

Have you sent the tyres yet? There's no immediate rush, I gotta paint the rims etc, but I'm eager to get my grubby little paws on them.

[ozkat]

Benz, havent sent the tyres yet but will do it early this week. Ive been rather busy at work.

[Benz]

Thanx mate.

[ozkat]

open to offers on unsold items.

[Large]

I'll give you $5 for everything.


What's the length of the fork outers and spacing of the brake bolts?

$100 for the forks.

[evad]

What condition are the forks in?
I am collecting parts to use on a gpz900r kawa that I am going to make into a streetfighter.
Thanks

[ozkat]

Forks are near perfect.

[ozkat]

MBT

[Gix11]

MBT? Are you going internet lingo boy on me Shayne?

.....actually that reminds me. This is what Oz and Huddo get up to at the weekends:

http://streetfighters.com.au/forum/upload/shayne_huddo.jpg

quote:Originally posted by evad

What condition are the forks in?
I am collecting parts to use on a gpz900r kawa that I am going to make into a streetfighter.
Thanks




What other plans do you have for the mighty 9 mate?

And who's that with Ozkat?

[ozkat]

umm that be Huddo [xx(] (black bandit JMC swingarm and ohlins usd front end)i really should delete that pic ;)

[evad]

Hey Im a bit thick, what is MBT?
I am in Redcliffe, would I be able to come down and have a look? You are on the Gold Coast right?
Im looking at a different seat and subframe, probably an R1, 3 spole mags, better brakes, belly pan. Also upside down forks if I can come to an agreement with Ozkat, I will have to make up a set of yokes to take the forks with risers for the renthals.
On the ebgine side I want to fuel inject and degree the cams , maybe look at turbo (I have a garrett T2 that should work well) :D
How is the engine on your 9 coming on?

[ozkat]

evad you have mail.

quote:Originally posted by ozkat

umm that be Huddo [xx(] (black bandit JMC swingarm and ohlins usd front end)i really should delete that pic ;)


Oh um good mate[:0][:o)][B)]

I was ever so worried that It was you're Mrs mate, and that was just plain scary![:0]

Any chick with a jaw line like that has definitely had a certain kind of operation, if you know what I mean.

And Huddo seemed such a nice boy when I met him.[8D]

[JackTar]

OZ if you are still trying to get rid of that oil cooler and it will go okay on an 87 Gixxer 11 I will take it.

[IMP-INC]

those rgv forls should just bolt straight on the spada, s i hear, u dont wanna do a free bee? next time i will wipe ya phone bill. hahaha nah i dont have the money. be good if i did

[ozkat]

Jack, i still have the oilcooler, it is the same as the Hel coolers that some use on GSXRs so no reason it wont fit. Im pretty sure the standard slabby oil lines screw straight into it.

[JackTar]

Mate send me an email jocblowy@optusnet.com.au with your bank details for DD and how much you want for postage to 2210.

[ozkat]

Jack you have mail.

[Benz]

Hey Shayne, do you still have the welder for sale?
How much now??:)..

[ozkat]

Benz, you have mail.

i've seen it,its only worth $75 max. but i hear postage will be $425.

[Benz]

Oz, you have mail.
Davo, you're a mongrel......but you already know this:)