gixxer 11 high preformance cam

[03gixxerpilot]

as the title says, i"m chasing a set of high preformance cams to suit an 90 gxxer 11 good con second hand acceptable the higher the spec the better to go into a drag bike of a friends:D

Cheers Clvie

[willow]

Heya gixxerpilot. Ivan Tighe in brissy (somewhere near there) are fucking exlnt with cam grinding. exaust and intake cams for my z cost just under 300.
But i dunno how much ya wanna spend.

[03gixxerpilot]

G'day willow, was the 300 for both or each and i take it that they were regrinds
I'm definatly intrested so if you could let me know the phone No that would be great.
Cheers Clive

[Tone]

Try (07)3844 4283. Not sure if it is still current though.

[loosebruce]

Waggott cams at Alstonville (near Lismore), might be worth a call.
I had some cams and rockers resurfaced by them a while back.

[willow]

Heya Gixxerpilot. Hope this helps, they are certainly worth a look.
tighecams.com.au The 300 was for both cams. These guys helped me out when i wanted BIG performance when i was racing.

[ozR1127]

[:p]iam using a set of '752'lift cams from ivan tighe also got the rockers resurfaced ,had to refly cut piston crowns ,they do very nice work , [:p]

[03gixxerpilot]

Looks like i'll be giving ivan tighe a call next week

ozR can you tell me which grind you got and how much you had to remove from the pistons for both Ex and In, what thickness head gasket you used and if you have had it dynoed, how much HP you were getting
Cheers Clive.