04' GSXR750 Parts FS

[chopaweeza]

For sale due to mounting legal bills over my divorce:

Low Kms engine
Complete electrics
Injection system
Near complete radial caliper front end(no mudguard)with braided lines & near new tyre
GSXR1000 rear(6" rim) with near new tyre
Swingarm assembly with braided brake line
Shockie
Right side rider peg assembly
Left side pillion peg & mount
Titanium exhaust system
Tank
Hand controls
And lots more


$3000 for the lot or decent offers on the rest. May do a deal on clumps of parts or a part exchange on a Z650SR.

Wayne
0425 216326

[03gixxerpilot]

Just out of courisoty how much for the 750 with all it needs to make it run, ie electrics injection and exhaust etc.

PS also how much for the front end.

[chopaweeza]

As a carkit type set up $1500 with radiator, injection system,exhaust, engine, main electrics etc . About a grand for the front end.

[03gixxerpilot]

Choppa would you know if the 04 motor would fit into an 02 chassis
I'm looking into it at the moment but haven't found anything as yet.

[03gixxerpilot]

PS i ment would it bolt in without any modifications.

[chopaweeza]

I just tried the 02' GSXR1000 frame over the engine. All but 2 of the engine mounts appear to line up. The 2 forward cylinder mounts are about 25mm further back on the 750 engine. It is a case of hole sawing the original frame and tig welding in new mounts.

[03gixxerpilot]

Thanks for the info choppa i'll pass that on and get back to you.

[chopaweeza]

No Problems. I'll be listing stuff on eBay over the next week or so starting with the Car Kit.

[03gixxerpilot]

go for it choppa, the young fella don't want to mod the chassis to fit the motor, thanks for taking the time to check out that question.

[chopaweeza]

The link to the car kit is:
http://cgi.ebay.com.au/Suzuki-GSXR750-Engine-Car-Kit-GSXR-motor-etc_W0QQitemZ4613076475QQcategoryZ35232QQrdZ1QQcmd ZViewItem I'll be listing parts over the next week with the front end going up on Wednesday, the swingarm on Freitag and the rest as the mood strikes me.

[chopaweeza]

The front end.

http://www.streetfighters.com.au/forum/upload/170186842225137.jpg

[Gix11]

Is it all straight and good to go? That'll sell fast if it is.

[chopaweeza]

Straight-Yep. There is a ding on the lower edge of the upper tubes on the inside that doesn't affect the forks and can be hidden by the mudguard. I've had 3 offers at on/around $1000 mark so we'll see what tomorrow brings before I list it(or not). The top yolk is off an 02' model and if you are using it with the clipons it needs a hole bored off center to make them fit(a 10 minute job). The brake lever is the original as I just spent $100 on a new set that aren't included. The bars are straight. I have most of the other parts that go on them and these are available seperately. Just checking my mail I see there is alot of interest in the rear wheel/swingarm and it's $700 for all that or $800 with the shock & billet lowering links. Inspections possible tomorrow. Call me this evening if you want to arrange that on 0425 216326.

[chopaweeza]

Front end is sold. Deposit taken on the rear wheel. Left switchblock sold. Crushed Yoshi pipes, box of slabby parts and 2x slabby shockies deposit taken.

[chopaweeza]

Ammendment: Guy buying the rear wheel reniged and it's now available again.