livewire
01-06-2010, 04:54 PM
I'm posting all this stuff now, so as to give any one going to the Winters a heads up, in case they want to look at it. I'll put prices on it all tomorrow night, wednesday 2/6/2010. I've just collected it up, but I'm busy as, I'll get to the dollar signs later.
Pro head and snowflake clutch still in my bike.
1428 bits are from the whole motor previously advertised.
I tore it down to check it anyhow, and I'm prepared to part it if theres any interest
Livewire GSX Shed Clearing Sale
1428cc parts combo.
EFE cases, bored to suit.
APE Gorilla block, sleeved, bored, o ringed.
JE Pistons, high comp x 4
Pistons whetted skirts, ceramic coated crowns.
HD head and case studs.
Falicon stud girdle kit
Billet cam chain adjuster
Copper head gasket.
Oil pump with 750 gears
12 runs old. Excellent condition. $2000
Falicon 'Supercrank' crankshaft and rods
Knife edge rods
Polished
Thrust clearances all OK
Straight cut primary drive gear
12 x mid 8 second runs old $2000
EFE 1100 cases, stock, with EFE 20mm pin Crank.
Thrust clearances good
Comes with second hand HD head and case studs, loose. $900
1327 cc barrels, o ringed, with 6 x JE high comp pistons, all matching, 2 are unused spares
OEM barrels, 1bore has cracked sleeve, replacement sleeve supplied
Pistons whetted skirts, ceramic crown coated
Spare set of rings
Copper head gasket $1000(hold)
GSXR 750J head, modified to suit GSX. 30 in / 26 ex mm Stainless valves
Flows 127 cfm ( =218 Hp)
Webb 213 Cams, with adjustable sprockets.
HD race valve springs
External oil feed, anodised connectors, braided hose.
12 runs old. Has done 8.42 @ 155 @ 650 lb's $3000
5 speed auto gearbox, with rotary shift drum.
12 runs old
Excellent condition $2000
5 speed auto gearbox, with shift drum.
Good working condition, some 'tooth decay', dogs ok $1000
MTC Snowflake lock up clutch.
Billet basket
Straight cut gear
OEM hub
With all springs, shims and antiweight springs, $850 (hold)
Quick access clutch cover to suit. $250
Slider clutch.
Billet basket
Straight cut gear
Quick access cover
Modified OEM hub
12 runs old $900(hold)
MSD MC4 programmable ignition system
With pick-ups, coils, leads and shift light. $700(hold)
Pro Stock head. 32.5mm Titanium in/ 28mm Stainless ex. valves
Flows 157 cfm
With pro stock cams, or very hot street cams, adjustable sprockets
HD race valve springs.
External oil feed.
Has done 7.49 @ 1428 cc, 7.44 @ 176, 1570 cc. $3500
GSX Side-winder stepped primary drag exhaust.
Headers and collector only.
Jethot coated silver $ bartered
48 mm powerjet Lectrons.
Alloy flow rings.
Cables and throttle grip.
Very good condition. $1200
Powerjets to suit. 10's to 120's $25 per set
Starter cart, starter and batteries
24 V. Forklift starter motor.
Works fine on 17:1CR, 1570cc motor.
Batteries good, leads good, connects with anderson plug $400(hold)
Set of APE HD head studs.
New in packaging $100 (hold)
Selection of standard GSX heads and barrels.
$ Ask if interested. (2X heads on hold)
Graeme 0418 577 143.
Can forward photos, ring to arrange.
Ring to arrange inspection of any goods at Winters.
Pro head and snowflake clutch still in my bike.
1428 bits are from the whole motor previously advertised.
I tore it down to check it anyhow, and I'm prepared to part it if theres any interest
Livewire GSX Shed Clearing Sale
1428cc parts combo.
EFE cases, bored to suit.
APE Gorilla block, sleeved, bored, o ringed.
JE Pistons, high comp x 4
Pistons whetted skirts, ceramic coated crowns.
HD head and case studs.
Falicon stud girdle kit
Billet cam chain adjuster
Copper head gasket.
Oil pump with 750 gears
12 runs old. Excellent condition. $2000
Falicon 'Supercrank' crankshaft and rods
Knife edge rods
Polished
Thrust clearances all OK
Straight cut primary drive gear
12 x mid 8 second runs old $2000
EFE 1100 cases, stock, with EFE 20mm pin Crank.
Thrust clearances good
Comes with second hand HD head and case studs, loose. $900
1327 cc barrels, o ringed, with 6 x JE high comp pistons, all matching, 2 are unused spares
OEM barrels, 1bore has cracked sleeve, replacement sleeve supplied
Pistons whetted skirts, ceramic crown coated
Spare set of rings
Copper head gasket $1000(hold)
GSXR 750J head, modified to suit GSX. 30 in / 26 ex mm Stainless valves
Flows 127 cfm ( =218 Hp)
Webb 213 Cams, with adjustable sprockets.
HD race valve springs
External oil feed, anodised connectors, braided hose.
12 runs old. Has done 8.42 @ 155 @ 650 lb's $3000
5 speed auto gearbox, with rotary shift drum.
12 runs old
Excellent condition $2000
5 speed auto gearbox, with shift drum.
Good working condition, some 'tooth decay', dogs ok $1000
MTC Snowflake lock up clutch.
Billet basket
Straight cut gear
OEM hub
With all springs, shims and antiweight springs, $850 (hold)
Quick access clutch cover to suit. $250
Slider clutch.
Billet basket
Straight cut gear
Quick access cover
Modified OEM hub
12 runs old $900(hold)
MSD MC4 programmable ignition system
With pick-ups, coils, leads and shift light. $700(hold)
Pro Stock head. 32.5mm Titanium in/ 28mm Stainless ex. valves
Flows 157 cfm
With pro stock cams, or very hot street cams, adjustable sprockets
HD race valve springs.
External oil feed.
Has done 7.49 @ 1428 cc, 7.44 @ 176, 1570 cc. $3500
GSX Side-winder stepped primary drag exhaust.
Headers and collector only.
Jethot coated silver $ bartered
48 mm powerjet Lectrons.
Alloy flow rings.
Cables and throttle grip.
Very good condition. $1200
Powerjets to suit. 10's to 120's $25 per set
Starter cart, starter and batteries
24 V. Forklift starter motor.
Works fine on 17:1CR, 1570cc motor.
Batteries good, leads good, connects with anderson plug $400(hold)
Set of APE HD head studs.
New in packaging $100 (hold)
Selection of standard GSX heads and barrels.
$ Ask if interested. (2X heads on hold)
Graeme 0418 577 143.
Can forward photos, ring to arrange.
Ring to arrange inspection of any goods at Winters.